{"product_id":"fp-finish-4k-satin-1","title":"FP - FINISH 4K SATIN WB URETHANE","description":"\u003cp\u003eFP-Finish 4K is a professional-grade, single-component water-based polyurethane designed to provide a clear, durable protective finish over properly prepared concrete, compatible epoxy systems and wood substrates. Its low-odor, easy-to-use formula requires no Part A\/Part B mixing and dries to a non-yellowing finish with excellent abrasion resistance, mechanical strength and chemical resistance.\u003c\/p\u003e\n\u003cp\u003eAvailable in Gloss, Satin and Matte finishes, FP-Finish 4K is ideal for interior commercial, institutional and residential floors exposed to pedestrian traffic and routine wear. It may be used as a protective clear coat over decorative flakes, quartz, aggregates and other compatible Florida Polymer coating systems.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSingle-component formula—no catalyst required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClear, non-yellowing finish\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAvailable in Gloss, Satin and Matte\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow odor and VOC compliant\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExcellent abrasion and chemical resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-priming over approved, properly prepared substrates\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with decorative flakes, quartz and aggregates\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCoverage: approximately 500–600 sq. ft. per gallon\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaximum recommended thickness: 8 mils\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne-gallon container\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInterior use only\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApplication and Cure Information\u003c\/p\u003e\n\u003cp\u003eShake the container thoroughly, mechanically mix for approximately two minutes, reseal and allow the material to rest for 8–10 minutes before application. Apply uniformly using a 1\/4-inch nap roller and cross-roll the final pass to promote an even, streak-free finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRecoat: 3–4 hours with ventilation; 6–8 hours without ventilation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTack-free: approximately 1 hour\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLight foot traffic: 4–6 hours with ventilation; 12–24 hours without ventilation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFull cure: 7 days\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRecommended application conditions: below 80% relative humidity with the substrate temperature at least 7°F above the dew point\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Coat Schedule\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCommercial or high-traffic areas: 3 coats\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eResidential high-traffic areas: 3 coats\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRestoration or medium-traffic areas: 2 coats\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLight-duty protection: 1–2 coats\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant Limitations\u003c\/p\u003e\n\u003cp\u003eFP-Finish 4K is not recommended for exterior applications, continuously wet areas such as showers or sinks, vehicular traffic or damp\/high-moisture substrates. Concrete must be clean, dry, sound and mechanically prepared before application. Test concrete moisture before installation; elevated moisture may require an approved Florida Polymer moisture-vapor barrier.\u003c\/p\u003e\n\u003cp\u003eCoverage and curing times are estimates and may vary based on substrate porosity, surface profile, application thickness, temperature, humidity and ventilation. Review the current Technical Data Sheet and Safety Data Sheet before use.\u003c\/p\u003e","brand":"Florida Polymer","offers":[{"title":"Default Title","offer_id":47178617880630,"sku":null,"price":172.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/5704\/9654\/files\/ChatGPTImageAug10_2026at11_08_23AM_56078dd4-903f-4e1b-ac7d-c1eb24f3c214.png?v=1786388991","url":"https:\/\/floridapolymer.com\/products\/fp-finish-4k-satin-1","provider":"Florida Polymer","version":"1.0","type":"link"}